Quote Originally Posted by Christopher_B View Post
I reinstalled the Daox bar after having it sandblasted, extra welding added and powdercoated. I also used socket head stainless bolts and new hard rubber bushings between the bar and the axle. I tightened pretty tight ... hopefully leaving enough flex in the bushings to take some pressure off thebar. I have about 40,000 miles on the bar plus the 8,000 Aries K put on before I bought it. I like the difference the bar makes and am doing my best to make it last as long as the car. I had to pry the spring to the side to get the hex key in the front bolt but it seemed to work out ok. I also used the black washers that came in the sway bar kit. They will probably rust and I may go back to stainless washers next time the bushings fail.
It's nice to see that your experiment with the rear sway bar is working. I went through two of them, but I liked what they did for my Mirage.

Thanks for sharing with us!!!!